Print Share

Worker killed after being pulled into wood-chipper

Date: 
Tuesday, 8 October, 2019 - 12:45
Category: 
Incidents & prosecutions
Location: 
New South Wales

A worker in Sydney recently died from fatal injuries after being pulled into a wood-chipper machine.

A group of workers were felling branches and vegetation at a school in Lindfield when the incident happened.

SafeWork NSW inspectors responded to the incident and attended the site and the regulator has commenced an investigation to determine the cause and circumstances of the incident.

The regulator said PCBUs must consider ‘reasonably practicable’ control measures to manage the risk of tree trimming and removal work.

Control measures that may prevent a similar incident include:

  • Conducting pre-start checks, to ensure equipment and systems are working correctly.
  • Making sure nothing is entangled in material before it’s fed into the wood chipper.
  • Keeping unnecessary ropes away from the work area.
  • Ensuring emergency stops and control bar are functioning properly.
  • Operating the wood chipper according to manufacturer’s instructions.
  • Ensuring teams consist of at least two competent workers, who have been given specific training on the individual machine being used
  • Feeding branches off the centre line. Where reasonably practicable, the operator feeding the branches into the wood chipper should do so from the side.
  • Using a ‘push-stick’ at least 1.5 metres long, to feed shorter material into the machine.
  • Stopping the rollers before reaching into the chute.
  • Making sure the wood-chipper is never left unattended while operating.