Search

Safety alert issued after multiple nail gun injuries

The following article is a news item provided for the benefit of the Workplace Health and Safety profession. Its content does not necessarily reflect the views of the Australian Institute of Health & Safety.
Date: 
Sunday, 13 March, 2022 - 12:15
Category: 
Policy & legislation
Location: 
South Australia

SafeWork SA recently issued a safety alert reminding PCBUs in the residential construction sector to pay more attention and supervision to apprentice carpenters after four apprentices received nail gun injuries last month.

The alert said carpenters should only use bump fire nail guns once adequately trained and deemed competent to use them.

On 25 February 2022, SafeWork SA received notification that a fourth-year apprentice received a penetration wound to his upper right thigh when he shot himself with a nail while kneeling. The apprentice required emergency services to bring him down from a scaffold before being treated at the Royal Adelaide Hospital.

A second incident occurred when a first-year apprentice was constructing wall frames on the ground when he tripped on the frame and the nail gun fired a nail, penetrating his right thigh above the knee.

A third incident occurred when a second-year apprentice received a penetration wound to his right index finger after the nail struck a knot while building a wall frame.

Earlier in the month, a first-year apprentice was ascending a ladder when the nail gun actuator was triggered firing a nail into the left knee.

The alert said most nail gun incidents occur when the nail gun is set to bump fire mode. This allows nails to be driven into an object by holding the trigger in the firing position and pressing the gun’s contact tip against the workpiece.

When operators carry the nail gun with the trigger depressed, the contact tip can inadvertently be bumped and the nail can be discharged from the gun. This can lead to serious injuries to the operator, or nearby workers.

The type of nail gun trigger system and the extent of training are important factors in reducing injuries. A full sequential trigger is always the safest trigger mechanism for the job.

SafeWork SA executive director, Martyn Campbell said duty holders need to focus on building the skill and capability of the apprentice rather than on the trigger type of the nail gun. The trigger type is less important to overall productivity if the gun user does not have the necessary skills to use it effectively.

“This is highlighted by the fact that in the past 5 years, 77 per cent of serious injuries notified to SafeWork SA associated with nail guns were to apprentices working in the residential construction sector,” said Campbell.

“Builders, contractors and group training organisations should consider their training and supervision of apprentices using nail guns when starting out in the industry.”